Step
01
Start the device
Before first use, activate the logger physically — no app needed for this step.
Instructions:
- Pull the tab firmly until it releases fully from the strip.
- This start the biofuel cell and power the logger.
- Wait at least 20 seconds after pulling the tab.
Button check: Confirm the indicator responds when pressed — this verifies the cell is active before initialization.
- Press right button to check the activation. If the LED flash red, the activation is a success.
Step
02
Initialize the logger
Once the device is activated, open the Init App and pair it with your Eco Logger to initialize the timestamp.
Initialization App:
Download the app on iOS
Download the app on Android
Instructions:
- Hold your phone near the logger's NFC zone.
- Wait for the "Initialized" confirmation before sealing the shipment.
- Press the right button on the logger, if the LED flash is green the initialisation is a success.
During the initialization process with the app:
- If a message as “Initialization Failed Product inactive” appears, wait for more seconds before new initialization attempt.
- If a message as “Initialization Failed Product stopped and unusable” appears, the Logger may be stopped and cannot be initialized again.
Step
03
Retrieve the data
At the end of its life, open the Retrieval App to read back the full temperature history stored on the logger via NFC.
Data Retrieval App:
Download the app on iOS
Download the app on Android
Instructions:
Tap your phone to the logger's NFC zone
- The full temperature log is pulled from the device to the app.
- Access to dashboard with Key measurements and graphs
- Export or share the reading history directly from the app via email.
Company:
BeFC, Techniparc Grand Île,
395 Rue de Docteur Marmonnier,
38190, Villard-Bonnot
France